IES News

Home/IES News/

Training for Flaw Detection is Vital Prior to Assembly

By |2020-11-25T10:23:00+00:00November 25th, 2020|Categories: Uncategorised|Tags: |

A supply chain is only as strong as the weakest link and when it comes to the rotary aviation industry, weakness is prohibited. Notwithstanding unexpected delays in production and training due to the COVID-19 pandemic, the Corpus Christi Army Depot’s (CCAD) Non-destructive Testing (NDT) program ensures that it is the strongest link in the supply chain [...]

Comments Off on Training for Flaw Detection is Vital Prior to Assembly

Parisa Shokouhi Named Editor-in-Chief of RNDE

By |2020-11-25T10:14:00+00:00November 25th, 2020|Categories: Uncategorised|Tags: |

UNIVERSITY PARK, Pa. — Parisa Shokouhi, associate professor of engineering science and mechanics and acoustics, was named editor-in-chief of Research in Nondestructive Evaluation (RNDE), the research journal of the American Society for Nondestructive Testing (ASNT). Parisa Shokouhi, associate professor of engineering science and mechanics and acoustics. IMAGE: PENN STATE COLLEGE OF ENGINEERING Shokouhi will begin her [...]

Comments Off on Parisa Shokouhi Named Editor-in-Chief of RNDE

X-ray inspection made easy with D-Tect X from DÜRR NDT

By |2020-11-25T09:57:00+00:00November 25th, 2020|Categories: Uncategorised|Tags: |

D-Tect X is the latest generation of DÜRR NDT’s proven software for industrial radiography and was developed from the ground-up in close cooperation with level 3 experts and users. The result is a software solution that sets new standards in terms of performance and user-friendliness and at the same time is extremely flexible. Everything is covered: [...]

Comments Off on X-ray inspection made easy with D-Tect X from DÜRR NDT

Flybotix’s ASIO Indoor Inspection Drone

By |2020-11-25T09:55:00+00:00November 25th, 2020|Categories: Uncategorised|Tags: |

Drones are often used not only for entertainment and video filming but also for industrial work at height. They allow you not to risk the health of specialists and often significantly speed up work. However, it is difficult for drones to fly inside buildings and technical structures for inspection. And when they collide with something, they [...]

Comments Off on Flybotix’s ASIO Indoor Inspection Drone

Appelix Announces Corrosion Blog

By |2020-11-19T23:50:00+00:00November 19th, 2020|Categories: Uncategorised|Tags: |

ApellixTM today announced it launched its blog as an informative source of information for the revolutionary magical technology of aerial robotics (drones) and how they assist in the war on corrosion. Drones are powerful "magical flying machines" straight out of science fiction. By adding robotic arms to drones Apellix has created a specialized tool needed for [...]

Comments Off on Appelix Announces Corrosion Blog

Collaboration Helps Military Veterans Transition into NDT Careers

By |2020-11-18T03:59:00+00:00November 18th, 2020|Categories: Uncategorised|Tags: |

Olympus, a leading manufacturer of nondestructive testing (NDT) equipment, is supporting training school Warrior To Inspector’s mission to help transition retiring military veterans into a new NDT career by providing advanced inspection instruments for their ultrasonic testing (UT) courses. Transitioning into an NDT career can be challenging without the right training, certifications and hands-on experience. Warrior [...]

Comments Off on Collaboration Helps Military Veterans Transition into NDT Careers

Advanced Analysis Software Maximizes OmniScan™ Users’ Weld Analysis Capabilities

By |2020-11-18T02:35:00+00:00November 18th, 2020|Categories: Uncategorised|Tags: |

Olympus’ release of its WeldSight™ companion PC software for the OmniScan™ X3 phased array flaw detector provides inspectors with powerful tools to push the boundaries of flaw characterization and sizing. Compatible with conventional UT, phased array (PA) and time-of-flight diffraction (TOFD) acquired data, the software enables inspectors to perform thorough post-inspection analyses that comply with strict [...]

Comments Off on Advanced Analysis Software Maximizes OmniScan™ Users’ Weld Analysis Capabilities

New High-precision CT System launched by VisiConsult

By |2020-11-12T19:08:00+00:00November 12th, 2020|Categories: Uncategorised|Tags: |

Once again one of the leading developers of X-ray systems, VisiConsult X-ray Systems & Solutions GmbH, was able to present further new developments this summer. After the in-house development was completed, a standardized high-precision CT system was quickly completed and delivered in two different configurations in August. A customer in Israel received one variant with a [...]

Comments Off on New High-precision CT System launched by VisiConsult

Olympus LEXT™ OLS5100 Laser Microscope’s Smart Features Empower Faster Experiment Workflows

By |2020-11-12T01:53:00+00:00November 12th, 2020|Categories: Uncategorised|Tags: |

WALTHAM, Mass., (November 11, 2020)—To provide the high levels of accuracy and precision required for sub-micron 3D observation and surface roughness measurement, the Olympus LEXT™ OLS5100 laser microscope offers guaranteed accuracy and precision* with smart features that make materials science experiment workflows faster and more efficient. Laser microscopes are essential equipment in manufacturing R&D and quality [...]

Comments Off on Olympus LEXT™ OLS5100 Laser Microscope’s Smart Features Empower Faster Experiment Workflows

Edge Solution Integrates Intelligent Automation For Visual Inspection

By |2020-11-10T22:55:00+00:00November 10th, 2020|Categories: Uncategorised|Tags: |

Manufacturers aim to deliver the highest quality at the lowest cost during the production or assembly process. At the same time regulations need to be met and worker safety must be guaranteed at all times. A wide range of assets, from machines to materials and products must be closely monitored for potential defects, and quality issues. [...]

Comments Off on Edge Solution Integrates Intelligent Automation For Visual Inspection
Load More Posts
Go to Top