New Leak Detection Tool For Mobile Devices Debuts: MISTRAS’ Smart Leak Finder™

By |2017-09-01T16:38:00+01:00September 1st, 2017|Categories: Blog|Tags: |

#ndt MISTRAS Group, Inc. (NYSE:MG) continues to build on its decades of leadership in acoustic emission (AE) inspection technology with the debut of the Smart Leak Finder™. The tool is an industrial-grade leak detection device that interfaces directly with Android® mobile devices, delivering an inspection system tailored to the modern-day technician. The Smart Leak Finder™ uses [...]

Comments Off on New Leak Detection Tool For Mobile Devices Debuts: MISTRAS’ Smart Leak Finder™

In-situ Eddy Current Inspection for Wire Drawing

By |2017-09-01T08:28:00+01:00September 1st, 2017|Categories: Blog|Tags: |

#ndt Contrôle Mesure Systèmes has developed a special version of its eddy current rotating head, RotoETscan HV, suitable for line drawing inspection for a diameter range of 0,8 to 10 mm. This system, easy to install on the production line, integrates a turntable (cassette) adapted to the product diameter. Eddy current probes (2 or 4) installed [...]

Comments Off on In-situ Eddy Current Inspection for Wire Drawing

NAVSUP FLC Jacksonville Site Holds First DoD Robotics Fuel Tank Inspection

By |2017-09-01T01:42:00+01:00September 1st, 2017|Categories: Blog|Tags: |

#ndt FORT WORTH, Texas (NNS) -- A contractor-operated robotics inspection team from Burns & McDonnell and A.Hak Industrial Services conducted the first autonomous tank bottom inspection of a Department of Defense (DoD) bulk fuel tank at Naval Air Station Fort Worth Joint Reserve Base July 10 - 14. This service is regularly performed in the commercial [...]

Comments Off on NAVSUP FLC Jacksonville Site Holds First DoD Robotics Fuel Tank Inspection

How to Harness the Power of Automated Visual Inspection

By |2017-09-01T01:40:00+01:00September 1st, 2017|Categories: Blog|Tags: |

#ndt So many things in food production could go wrong: from fruits and vegetables getting moldy to insects and small animals invading bagged salads and packaged pastry. Let’s look how utomated visual inspection helps prevent these faults from coming into customers’ view. Discovering a rotten apple, a moldy cherry or a nasty insect in the produce [...]

Comments Off on How to Harness the Power of Automated Visual Inspection

Register to Attend Composite Manufacturing & Structural Engineering Technology Hands-on Lab

By |2017-09-01T01:37:00+01:00September 1st, 2017|Categories: Blog|Tags: |

#ndt Oct. 3-4 National Center for Aviation Training, 4004 N. Webb Rd. Cost: $755 All students who successfully complete this course will be awarded 0.5 graduate credit hours. A one-time $10 application fee is required if you have not previously enrolled at Wichita State University. Wichita State University is offering a two-day combined lab course twice [...]

Comments Off on Register to Attend Composite Manufacturing & Structural Engineering Technology Hands-on Lab

US Navy Collisions Point to Risks of Automation

By |2017-09-01T01:34:00+01:00September 1st, 2017|Categories: Blog|Tags: |

#ndt Four collisions involving US Navy ships this year have resulted in the deaths of 17 sailors and the injury of several more, along with millions of dollars in equipment damage. Several senior officers have lost their jobs as a result. The worst of these accidents occurred in high-traffic areas in Asia: the USS Fitzgerald collided [...]

Comments Off on US Navy Collisions Point to Risks of Automation

Yuneec Targets Industrial Inspection with Drone Platform

By |2017-09-01T01:30:00+01:00September 1st, 2017|Categories: Blog|Tags: |

#ndt Chinese aircraft manufacturer Yuneec has taken aim at the industrial and commercial drone markets with a new hexacopter based on its consumer-grade Typhoon H aerial platform. The H520 features new mission planning software and a range of upgraded cameras, including one with a 1-inch Sony Exmor sensor. The H520 airframe itself doesn't appear to differ [...]

Comments Off on Yuneec Targets Industrial Inspection with Drone Platform

Sky-Futures Lands $4M from Mitsui for Drone Inspection

By |2017-09-01T01:26:00+01:00September 1st, 2017|Categories: Blog|Tags: |

#ndt Sky-Futures, a UK provider of drone-based industrial inspection technology has launched a partnership with Mitsui & Co., Ltd. ("Mitsui") of Japan. The partnership will see Mitsui expand the use of drone-based remote sensing, industrial inspection and 3D asset management visualisation to its global network of Mitsui companies and clients initially in the energy, marine and [...]

Comments Off on Sky-Futures Lands $4M from Mitsui for Drone Inspection
Go to Top